Server 2003 MCSE Questions part-16

151. What command sets or clears extended CTRL+C checking? Answer: BREAK
     
152. Which DOS command will display or modify file extension associations? Answer: ASSOC
153. Which DOS command will display the contents of a text file? Answer: TYPE
154. Which DOS command will copy files and directory trees? Answer: XCOPY
155. Which DOS command will shift the position of replaceable parameters in batch files? Answer: SHIFT
156. Which DOS command will search for a text string in a file or files? Answer: FIND
157. Which DOS command will compare the contents of two files or sets of files? Answer: COMP
158. What command directs the Windows 2000 command interpreter to a labeled line in a batch program. Answer: GOTO
159. Which DOS command will display output one screen at a time? Answer: MORE
160. What command begins localization of environment changes in a batch file. Answer: SETLOCA

Server 2003 MCSE Questions part-15

141. What command moves one or more files from one directory to another directory Answer: MOVE
     
142. Which DOS command will create, change, or delete the volume label of a disk?
     Answer: LABEL
143. Which DOS command will compare two files or sets of files, and displays the differences between them? Answer: FC
144. What command performs conditional processing in batch programs. Answer: IF
145. Which DOS command will remove a directory (short version)? Answer: RD
146. Which DOS command will display or set the system time? Answer: TIME
147. What command schedules commands and programs to run on a computer. Answer: AT
148. What command displays a list of files and subdirectories in a directory. Answer: DIR
149. Which DOS command will enable Windows NT to display an extended character set in graphics mode? Answer: GRAFTABL
150. Which DOS command will edit command lines, recalls Windows NT commands, and creates macros? Answer: DOSKEY

Server 2003 MCSE Questions part-14

131. What command displays messages, or turns command echoing on or off. Answer: ECHO
     
132. Which DOS command will display or modifies file types used in file extension associations? Answer: FTYPE
133. Which DOS command will display the name of or changes the current directory? Answer: CHDIR
134. What command displays or modifies file extension associations Answer: ASSOC
135. What command prints a text file. Answer: PRINT
136. What command converts FAT volumes to NTFS.You cannot convert the current drive. Answer: CONVERT
137. What command records comments (remarks) in batch files or CONFIG.SYS. Answer: REM
138. Which DOS command will configure a system device? Answer: MODE
139. Which DOS command will call one batch program from another? Answer: CALL
140. Which DOS command will clear the screen? Answer: CLS

Server 2003 MCSE Questions part-13

121. When WINNT32 is invoked with the /m: parameter, and alternate path for Windows 2000 (?) is defined.
     1. Distribution files
     2. Temporary files
     3. Answer files
     4. Post installation batch files
     5. None of the above
     Answer: A
122. Which cable type can operate a speeds of 100Mbps?
     1. 10Base2
     2. Category 3
     3. 10Base5
     4. Token Ring
     5. Category 5
     Answer: E
123. Windows 2000 supports Kerebos authentication.
     1. TRUE
     2. FALSE
     Answer: A
124. What is the minimum recommended processor for a Windows 2000 Server installation?
     1. 133MHz
     2. 166MHz
     3. 250MHz
     4. 300MHz
     5. 366MHz
     Answer: A
125. Which of the following operating systems replaces Windows 95, Windows 98, and Windows NT 4.0 in a business environment?
     1. Windows 2000 Client
     2. Windows 2000 Professional
     3. Windows 2000 Workstation
     4. Windows 2000 End-user
     5. Windows 2000 Server
     Answer: B
126. Which of the following operating systems can be upgraded to Windows 2000?
     1. Windows 95
     2. Windows 98
     3. Windows 98SE
     4. Windows NT 3.5.1
     5. All of the above
     Answer: E
127. What should be download and run to check a system for Windows 2000 compatibilty?
     1. Windows 2000 System Analysis Tool (SAT)
     2. Windows 2000 Installation Preview
     3. Windows 2000 Readiness Analyzer
     4. Windows 2000 System Integrity Checker
     5. None of the above
     Answer: C
128. What is the minimum processor requirement for Windows NT Server 4?
     1. 486DX
     2. P133
     3. P233
     4. P300
     5. P350
     Answer: A
129. Which security model is used in a peer-to-peer network?
     1. Access Control Lists (ACLs)
     2. Access Control Entries (ACEs)
     3. Password-protected Shares
     4. Share-level Security
     5. User-level Security
     Answer: D
130. When using WINNT32, the file WINNT32.LOG is the default file name for the parameter.
     1. /DEBUG
     2. /LOG
     3. /RECORD
     4. /RESPONSE
     5. None of the above
     Answer: A

Server 2003 MCSE Questions part-12

111. Which protocol cannot be routed?
     1. TCP/IP
     2. SPX/IPX
     3. NetBEUI
     4. ARP/RARP
     5. UDP
     Answer: C
112. What network evolved from the Defense Department's ARPANET?
     1. MILNET
     2. ARP/RARP
     3. TCP/IP
     4. Ethernet
     5. Internet
     Answer: E
113. SYSDIFF can be used even if the base and target computers are not on the same version of Windows 2000 (or Windows NT).
     1. TRUE
     2. FALSE
     Answer: B
114. What is a MAC address in an Ethernet network?
     1. The address assigned by DHCP.
     2. A TCP/IP address.
     3. The physical address assigned by the NIC manufacturer.
     4. A logical address created by the network administrator.
     5. A logical address which is subnet specific.
     Answer: C
115. RG-59 coaxial cable is commonly used with?
     1. Thicknet
     2. Thinnet
     3. UTP
     4. Cable TV
     5. ARCnet
     Answer: D
116. Answer:

117. Select the proper Windows 2000 Server for the following configuration:
     12 CPUs
     32 GB RAM
     to be used as a large-scale web site host

     1. Windows 2000 Server
     2. Windows 2000 Professional
     3. Windows 2000 Advanced Server
     4. Windows 2000 Datacenter Server
     5. Windows 2000 NetManager
     Answer: D
118. Which IEEE 802 protocol defines Broadband technology?
     1. 802.1
     2. 802.3
     3. 802.5
     4. 802.7
     5. 802.9
     Answer: D
119. Windows clustering provides with of the following benefits?
     1. high-availability
     2. network load balancing
     3. component load balancing
     4. all of the above
     5. none of the above
     Answer: D
120. Windows 2000 Professional supports dual-boot configurations with?
     1. Windows for Workgroups 3.11
     2. Windows 3.x
     3. MS-DOS
     4. OS/2
     5. all of the above
     Answer: E

Server 2003 MCSE Questions part-11

101. Which of the following is a transport-layer protocol?
     1. NetBEUI
     2. NetBIOS
     3. NDOS
     4. PPP
     5. SLIP
     Answer: A
102. NetBEUI could be used in?
     1. small, department-sized networks
     2. large multi-building networks
     3. WANs
     4. MANs
     5. any network which supports the OSI model
     Answer: A
103. Which of the following operating systems can be upgraded to Windows 2000?
     1. Windows NT 3.5.1
     2. Windows NT Workstation
     3. Windows NT Server
     4. Windows NT Terminal Server
     5. All of the above
     Answer: E
104. Which of the following media has the highest EMI?
     1. UTP
     2. STP
     3. coaxial cable (thin)
     4. radio
     5. microwave
     Answer: d
105. When using SYSPREP, the base computer must not be a member of a domain.
     1. TRUE
     2. FALSE
     Answer: A
106. Which of the following operating systems can be upgraded to Windows 2000?
     1. Windows 95
     2. Windows 98
     3. Windows 98SE
     4. Windows NT 3.5.1
     5. All of the above
     Answer: E
107. he GUI tool used to build the UNATTEND.TXT file included with the Windows 2000 Resource Kit is?
     1. SETUPMGR.EXE
     2. UNATTEND.EXE
     3. PREBUILD.EXE
     4. SYSLOAD.SYS
     5. SETUP.EXE
     Answer: A
108. What should the impedance on RG-11 cable be?
     1. 50
     2. 75
     3. 90
     4. 93
     5. 98
     Answer: A
109. What is a FDDI network?
     1. Bus network
     2. EMI suseptible network
     3. Star network
     4. Ring network
     5. 10BaseF network
     Answer: D
110. The Windows 2000 Server Indexing Service can be used to automatically build an index of a Web server.
     1. TRUE
     2. FALSE
     Answer: A

Server 2003 MCSE Questions part-10

91. When using WINNT32, to define an alternative path to the Windows 2000 distribution files, which parameter is used?
    1. /A
    2. /M
    3. /P
    4. /S
    5. None of the above
    Answer: B
92. Which IRQ has a standard function as COM3?
    1. 2
    2. 4
    3. 6
    4. 8
    5. 10
    Answer: B
93. he acronym UDF, when used with an unattended installation, stands for?
    1. Unattended Database File
    2. Unique Default File
    3. Uniform Database Format
    4. Unified Definition File
    5. Uniqueness Database File
    Answer: E
94. The Network Connection Wizard allows you to set up virtual private networks.
    1. TRUE
    2. FALSE
    Answer: A
95. Which access method is used for network access by Ethernet?
    1. Token Ring
    2. CSMA/CA
    3. CSMA/CD
    4. CTS / RTS
    5. Xon / Xoff
    Answer: C
96. Which network must be present to use RIS?
    1. Telnet
    2. DHCP
    3. BOOTP
    4. RAS
    5. Any of the above
    Answer: B
97. he interface which guides a user through a RIS installation is called?
    1. Client Installation Wizard (CIW)
    2. Remote Server Wizard (RSW)
    3. Remote Client Wizard (RCW)
    4. Remote Operating System Installation (ROSI)
    5. None of the above
    Answer: A
98. CSMA/CD stands for?
    1. Complete System for Media Attenuation and Collision Detection
    2. Collision Signaling - Message Access / Collision Detection
    3. Collision Sense Multiple Access / Common Deferment
    4. Carry Signal Method Access / Complete Detection
    5. Carrier Sense Multiple Access / Collision Detection
    Answer: E
99. To configure RIS, the RIS host must also be a domain controller.
    1. TRUE
    2. FALSE
    Answer: B
100. When installing a dual-boot configuration using Windows 98 and Windows 2000 Professional, the primary partition may be?
     1. FAT
     2. FAT16
     3. FAT32
     4. NTFS
     5. NFS
     Answer: A or B

Server 2003 MCSE Questions part-9

MCSE (Microsoft Certified Systems Engineer) that has been introduced by Microsoft includes the knowledge of Windows NT Workstation, booting process, different protocol such as UDP, TCP/IP, FTP, etc, implementation of security threats, wireless LAN concepts, troubleshooting of Windows Operating System, etc. Below is the set of questions that includes the knowledge of networking, so let us have a look on such question answer that would certainly help you in cracking the interview, thereby getting a good job.

81. What is the message that a computer broadcast to each workgroup or domain, when it becomes the Master Browser?
    1. Domain announcement
    2. Election packet
    3. Backup files
    4. Data packet
    5. Request announcement
    Answer: A
82. What is the use of PPTP (Point-to-Point Tunneling Protocol) in Windows NT Workstation?
    1. Establishing communication between multiple users
    2. Communicating with multiple links
    3. Establishing a secured network connection over the internet
    4. Connect three or more different network together
    5. None of these
    Answer: C
83. Which is the component that enables graphical capabilities for OS/2 subsystem?
    1. Presentation manager
    2. Metafile conversion interpreter
    3. DirectX
    4. OS/2
    5. None of these
    Answer: A
84. What is the full form of ISDN?
    1. Internet Services Digital Network
    2. Integrated Services Domain Network
    3. Integrated Services Digital Network
    4. Internet Services Domain Network
    5. None of these
    Answer: C
85. Which is the default transport protocol for Windows NT?
    1. UDP
    2. FTP
    3. RIP
    4. TCP/IP
    5. IPX/SPX
    Answer: D
86. What component of Window NT must be present in order to enable the client to use NetWare utilities?
    1. CSNW (Client Services for Netware)
    2. NWLink
    3. GSNW (Gateway Services for NetWare)
    4. NetBIOS
    5. None of these
    Answer: A
87. To display the display network information and routing timers, which protocol is used?
    1. show IP protocol
    2. show IP router
    3. TCP/IP
    4. Internet Protocol
    5. None of these
    Answer: A
88. When the Peer Web Services is installed, then what information services can be hosted?
    1. Email
    2. Web
    3. TCP
    4. FTP
    5. Gopher
    Answer: B AND D
89. What is the full form of SNMP?
    1. Simple Network Management Protocol
    2. Simple Networking Management Protocol
    3. Simple Network Memory Protocol
    4. Simple NetWare Management Protocol
    5. Simple NetWare Memory Protocol
    Answer: B
90. What is the purpose of DHCP in a network?
    1. Automatic configuration of TCP/IP clients
    2. Peer web services
    3. Client service for NetWare
    4. Maintaining internet routing table
    5. Transferring emails
    Answer: A

Server 2003 MCSE Questions part-8

MCSE (Microsoft Certified Systems Engineer) is a certification in networking that is introduced by Microsoft to certify the individuals who want to make their career in the field of computer networks. In other words, it conducts examination related to Windows NT Workstation, operating system, etc. It is the most popular certification/ training program that helps in getting a job in the networking related field. There is a set of question answer series related to networking that would help you to attain the certification degree, thereby getting a job in this field.

71. The internet service manager is used to manager ______________ service of Window NT Workstation?
    1. Peer to peer service
    2. Remote access service
    3. Netware client service
    4. Peer web service
    5. None of these
    Answer: D
72. What is the purpose of IE (Internet Explorer)?
    1. Manage relational database management system
    2. Viewing network files system
    3. Creating slide show presentation
    4. Viewing Web based graphical and text content
    5. None of these
    Answer: D
73. What is a common in FTP command line utility and IE?
    1. Bothe can download files from internet
    2. Both can send and receive data via email
    3. Both can view data and files being transferred
    4. Both can monitor the performance of remote system
    5. Both can share the same network
    Answer: A
74. What is the full form of HAL?
    1. Hardware Abstract Layer
    2. High Abstract Layer
    3. Hardware Abstraction Layer
    4. Host Abstract Layer
    5. None of these
    Answer: C
75. Which of the services are required by TCP/IP when installed on Windows NT Workstation?
    1. Remote access services
    2. Peer to peer services
    3. Peer web services
    4. NetWare client services
    5. None of these
    Answer: C
76. How can you allow access to a NetWare file server for larger group?
    1. Using intranet
    2. Using GSNW
    3. Using NWLink
    4. Using Ethernet
    5. Using CSNW
    Answer: B
77. NetWare server use which transfer protocol by default?
    1. FTP
    2. TCP/IP
    3. IPX/SPX
    4. NetBIOS
    5. None of these
    Answer: C
78. Which type of frame setting is used for network adapters?
    1. Auto
    2. Ethernet 802.3
    3. Ethernet 803.2
    4. Ethernet 802.1
    5. All the above
    Answer: A
79. ____________ maintains a copy of primary domain controller database?
    1. Backup browser
    2. Primary database
    3. Secondary database
    4. Backup domain controller
    5. Election packet
    Answer: D
80. What does the command start/low <application> do?
    1. Launches an application at low execution priority
    2. Adds an application to the start menu
    3. Filtering network packets
    4. All the above
    5. None of these
    Answer: A

Server 2003 MCSE Questions part-7

MCSE (Microsoft Certified Systems Engineer) is a certification course that is developed by Microsoft for those interested candidate who want to develop their skills in the field of networking and technology. This certification course covers main topics related to networking such as LAN, WAN, booting, FAT, NTFS, DNA, DHCP, Workgroups, Domains, Network Browsing and all the other concepts of networking. Let us go through some of the question and answered related to networking. For achieving MCSE certification you need to pass MCSE exam and this question answer will certainly help you in cracking the interview as well.

61. Name the effective way to reduce redundancy of files?
    1. Stripe set
    2. Convert the partition to FAT
    3. Convert the partition to NTFS
    4. Disk Duplexing
    5. Compression
    Answer: E
62. When the computer is booted, which process is used for implemented for security user interface?
    1. Booting interface
    2. Access token
    3. WinLogon
    4. Accounts dialog box
    5. None of these
    Answer: C
63. Which of the given option describes which user has access to an object and the type of access?
    1. Account logout automatically
    2. Logon authentication
    3. Logon security warning
    4. Access control list
    5. None of the above
    Answer: D
64. Which of the following option creates a security access manager process?
    1. Access token
    2. Attribute token
    3. User permission account
    4. WinLogon
    5. Access Control
    Answer: A
65. Why is DLC protocol used when installing Windows NT Workstation?
    1. Transfer of file between peer clients
    2. Communication within the networked HP printers
    3. Connecting the servers
    4. Managing the UNIX machine
    5. None of these
    Answer: B
66. For automate the logon process, which of the following option is used under WinLogon Registry Key?
    1. DomainName and UserName
    2. LogonName and UserName
    3. DefaultDomainName and DefaultUserName
    4. DefaultLogonName and DefaultUserName
    5. DefaultDomainUser and DefaultUserName
    Answer: C
67. The default directory (Inetpub/ftproot) is basically used for?
    1. To store files and documents
    2. To configure the settings
    3. To communicate between the clients
    4. To store ACLs documents
    5. To store files to be accessed via FTP (File Transfer Protocol)
    Answer: E
68. What is the use of Telnet?
    1. Uploading the files
    2. Downloading the files
    3. Establish a command-line connection with UNIX
    4. Sending and receiving emails
    5. None of these
    Answer: C
69. What is the use of WINS on a network?
    1. Maintaining dynamic routing table
    2. Creating IP address
    3. Microsoft NetBIOS name resolution to IP addresses
    4. Assigning IP address to clients
    5. None of these
    Answer: C
70. What is the use of DNA on NT network?
    1. Maintaining dynamic routing table
    2. Sending and receiving emails
    3. Domain name resolution to IP address
    4. Assigning IP address to clients
    5. Remote access service
    Answer: C

Server 2003 MCSE Questions part-6

Microsoft Certified Systems Engineer (MCSE) is an examination that focuses on the topics such as Windows NT Workstation, IP addressing, network security and management, different types of protocol such as RIP, EIGRP, OSPF, etc, NetWare connectivity, and Network Environment. Let us have a look at this set of questions along with the correct answers provided at the end of each questions. This questionnaire session will surely going to enhance your knowledge in the field of networking and technology.

51. What is multiprocessing?
    1. It is using of multiple microprocessor in different computers
    2. It is using of one or more microprocessor in same computers
    3. It is running of one and more processes at a single time
    4. It is running of one and more processes at a single network
    5. None of these
    Answer: B
52. Which of the one supports Windows NT?
    1. Coherent multiprocessing
    2. Incoherent multiprocessing
    3. Symmetrical multiprocessing
    4. Asymmetrical multiprocessing
    5. All of these
    Answer: C
53. What is the core of Windows NT known as?
    1. Process manager
    2. Executive mode
    3. Read write mode
    4. Kernel
    5. Privilege mode
    Answer: D
54. What is the use of Sysdiff utility?
    1. Creating user and group
    2. Converts program group to shortcut menu
    3. Creating different files to automate to install third party application
    4. Creating an mirror image of the hard disk on the computer
    5. Establishing low-level security for resource access
    Answer: C
55. What is the purpose of unattend.txt duration the installation process?
    1. It gives the answer for the prompt that is meet during Setup
    2. It support during third party installation
    3. It provides information about different drives on the computer network
    4. It creates a computer account, the name of the computer along with the domain name
    5. None of these
    Answer: A
56. When Windows NT workstation is installed, which two user accounts are created?
    1. Super user
    2. Administrator
    3. End user
    4. Guest
    5. None of the above
    Answer: B and D
57. How to set the date and time of Windows NT workstation computer?
    1. Go to date and time tab of WinMSD
    2. Go to system time
    3. Through the time/date applet
    4. Go to date/time tab of system applet
    5. None of the above
    Answer: C
58. Name the control panel applet that is used to configure Window NT Workstation with the UPS?
    1. System
    2. Device
    3. Power
    4. UPS
    5. None of these
    Answer: D
59. Which control panel applet is used to start, pause and stop the Windows NT Workstation system services?
    1. System
    2. Services
    3. Network
    4. Devices
    5. All the above
    Answer: B
60. Which is not the feature of Windows NT Workstation?
    1. Fault tolerance
    2. Disk Striping
    3. RAID
    4. Disk Duplexing
    5. None of these
    Answer: A

Server 2003 MCSE Questions part-5

Microsoft Certified Systems Engineer is one of the best certification launched by Microsoft in order to validate a network associates abilities. This section of question and answer deals with RAID, operating system, troubleshooting, protocol, TCP/IP, OSI model, and a) Organizationally Unique Identifier (OUI). Let us have a look on these questions one by one.

41. What is the fault tolerance of RAID 6?
    1. 0 drive
    2. 1 drive
    3. 2 drives
    4. 3 drives
    5. 4 drives
    Answer: C
42. ____________ is a process of initializing, loading and finding the operating system?
    1. Booting
    2. Troubleshooting
    3. Internetworking
    4. Network Browsing
    5. None of these
    Answer: A
43. Name the widely known protocol that is used for interconnecting computers?
    1. User Datagram Protocol
    2. File Transfer Protocol
    3. Hyper-Text Transfer Protocol
    4. Transmission Control Protocol/Internet Protocol (TCP/IP)
    5. Interior Gateway Routing Protocol
    Answer: D
44. Which is the layer of OSI model that is responsible for breaking down the large messages into small packets and later on reassembling them together and sending them to their destination?
    1. Physical layer
    2. Data link layer
    3. Transport layer
    4. Application layer
    5. Network layer
    Answer: C
45. Name the non-volatile storage in the computer system?
    1. Files
    2. Floppy disk
    3. Hard disk
    4. RAM
    5. Folder
    Answer: B and C
46. What is the minimum number of drives in RAID 6?
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Answer: D
47. What is the space complexity of RAID 6?
    1. 1
    2. 1 - 1/n
    3. 1 - 2/n
    4. 1 - 3/n
    5. None of these
    Answer: C
48. What is the full form of OUI?
    1. Organizationally Unique Identifier
    2. Orthogonal Unique Identifier
    3. Organizationally Unique Identification
    4. Orthogonal Unique Identification
    5. None of these
    Answer: A
49. Let us assume that there is a server that contains 3 MAC addresses, then how many network cards does it require?
    1. 2
    2. 3
    3. 4
    4. 6
    5. 10
    Answer: B
50. Which command is used to view the IP Configuration of a network on a server?
    1. Ping
    2. Ipconfig
    3. Ipconfig /all
    4. Ping -all
    5. None of these
    Answer: C

Server 2003 MCSE Questions part-4

MCSE is a type of exam given to earn a certificate as a Microsoft Certified Systems Engineer. This certification course will help you in strengthening your resume with the skills of networking. The below test comprises of questions related to MAC layer, internet hosts, multicasting, Dynamic Host Configuration Protocol (DHCP), Resource Reservation Protocol (RSVP), IP addresses, Orthogonal Frequency-Division Multiple Access(OFDMA) and router. Let us have a look on some of these questions that will help you in clearing MCSE certifications.

31. Medium access control layer provides a channel access control mechanism known as ____________?
    1. Ethernet
    2. Medium Access Protocol
    3. Channel Access Protocol
    4. Ring Network
    5. CSMA/CD Protocol
    Answer: B
32.  Which is the protocol that allows internet hosts to share in multicasting?
    1. Internet Group Management Protocol (IGMP)
    2. Hyper-Text Transfer Protocol (HTTP)
    3. File Transfer Protocol (FTP)
    4. Internet protocol
    5. Ethernet protocol
    Answer: A
33.  What is the purpose of DHCP (Dynamic Host Configuration Protocol) ?
    1. It is used to provide a domain name
    2. It is used to provide reverse resource to the network
    3. It is used to assign IP addresses to computer in the network
    4. It is used to manage the network of different computers
    5. It is used to send any information from one network to another network
    Answer: C
34.   What is the full form of RSVP?
    1. Reverse Service Protocol
    2. Reverse Reservation Protocol
    3. Resource Rapid Protocol
    4. Resource Reservation Protocol
    5. None of these
    Answer: D
35. What is the use of PPP (Point to Point Protocol)?
    1. It is used to provide communication between two computers
    2. It is used to join two networks over a serial port
    3. It is used to provide communication between two computers over a serial cable
    4. It is used to send packets of data from one computer system to the other
    5. It is used to assign IP address
    Answer: C
36. What is the maximum number of channels provided by conventional WDM in the third transmission window?
    1. 5
    2. 7
    3. 8
    4. 9
    5. 12
    Answer: C
37. What is the full form of OFDMA?
    1. Orthogonal Frequency-Division Multiple Access
    2. Orbital Frequency-Division Multiple Access
    3. Orthogonal Frequency-Division Multiplexing
    4. Orthogonal Frequency-Division Mode Access
    5. None of these
    Answer: A
38. What is the function of PING?
    1. It returns the number of packets lost, received and sent
    2. It returns the IP address as an output
    3. It returns the information about the data packets
    4. It checks that the system is in network or not
    5. All the above
    Answer: E
39. What are the basic components of a router?
    1. Virtual terminal
    2. NVRAM
    3. Flash Memory
    4. ROM
    5. All the above
    Answer: E
40. What is the area failure rate of RAID 1?
    1. Variable
    2. n(n-1)r²
    3. n(n+1)r
    4. rⁿ
    5. 1-(1-r)ⁿ
    Answer: D

Server 2003 MCSE Questions part-3

21. A communication protocol is a messaging system that allows exchanging of messages between the computer systems. What are the things that are included in this communication protocol?
    1. Signaling
    2. Authentication
    3. Error detection and correction
    4. All of the above
    5. None of these
    Correct Answer: D
22. In Transfer control protocol/internet protocol (TCP/IP) model, the network interface is related to which protocol?
    1. Ethernet protocol
    2. Internet protocol
    3. HTTP (Hyper-text transfer protocol)
    4. FTP (File transfer protocol)
    5. Telnet
    Correct Answer: A
23. Internetworking is a process by which two computer networks are joined together so that the packets and information can be passed on between networks. This term internetworking is related to which layer of the OSI (Open System interconnection) model?
    1. Application layer
    2. Network layer
    3. Data link layer
    4. Presentation layer
    5. Session layer
    Correct Answer: B
24. What is the full form of SNMP?
    1. Simple Network Management Protocol
    2. Simple Networking Management Protocol
    3. Simple Network Mail Protocol
    4. Simple Network Mailing Protocol
    5. None of these
    Correct Answer: A
25. What is another name for TCP/IP model?
    1. Interconnection model
    2. Network model
    3. Internet Protocol Suite
    4. All the above
    5. None of these
    Correct Answer: C
26. Which protocol is used for transferring data and information from one network to the other network?
    1. Transmission Control Protocol
    2. Internet protocol
    3. Ethernet protocol
    4. Hyper-text transfer protocol
    5. File transfer protocol
    Correct Answer: A
27. What is the full form of FTAM?
    1. File Transmission and Access Mail Protocol
    2. File Transport and Access Management Protocol
    3. File Transfer and Access Control Protocol
    4. File Transmission and Access Management Protocol
    5. File Transfer and Access Management Protocol
    Correct Answer: E
28. Multiprotocol Label Switching (MPLS) works as OSI layer. So, between which two layers does MPLS works on?
    1. Physical Layer and Data Link Layer
    2. Data Link Layer and Network Layer
    3. Network Layer and Transport Layer
    4. Transport Layer and Session layer
    5. Session Layer and Presentation Layer
    Correct Answer: B
29. What is the full form of UNDI?
    1. Universal Network Device Interface
    2. Uniform Network Device Interface
    3. Universal Network Device Interconnection
    4. Uniform Network Drive Interconnection
    5. Universal Network Drive Interface
    6. Uniform Networking Device Interconnection
    Correct Answer: A
30. Which are the layers that act as an interface for MAC sub-layer?
    1. Network Layer and  Data Link Layer
    2. Application Layer and Network Layer
    3. Logical Link Control Layer and Network's Physical Layer
    4. Physical Layer and Data Link Layer
    5. Logical Link Control Layer and  Data Link Layer
    Correct Answer: C

Server 2003 MCSE Questions part-2

11. What is the minimum number of drives in RAID 2?
    1. 2
    2. 3
    3. 4
    4. 5
    5. 6
    Answer: B
12. What is the area failure rate of RAID 0?
    1. 1-r
    2. rⁿ
    3. n(n-1)(n-2)r³
    4. n(n-1)r²
    5. 1-(1-r)ⁿ
    Answer: E
13. What is another name of Interrupt handler?
    1. Interrupt Service Handler
    2.  Interrupt System
    3. Interrupt Service Routine
    4. Interrupt Service Router
    5. Interrupt System Handler
    Answer: C
14. What is RAID 1 referred as -----------?
    1. Mirroring
    2. Imagine
    3. Stripping
    4. Partial Mirroring
    5. Block Level Striping
    Answer: A
15. What is the space complexity of RAID 2?
    1. N(n-1)
    2. 1 - 1/n . log₂(n-1)
    3. 1 - 2/n
    4. 1 - 1/n
    5. log₂(n-1)
    Answer: B
16. What is the full form of IRQ?
    1. Internet request
    2. Internal request
    3. Interrupt request
    4. Internet router
    5. None of these
    Answer: C
17. What is the area failure rate of RAID 6?
    1. n(n-1)r²
    2. n(n+1)r²
    3. n(n-1)(n-2)
    4. n(n-1)
    5. n(n-1)(n-2)r³
    Answer: E
18. Whish two companies joined together to developed Network Driver Interface Specification (NDIS)?
    1. Microsoft and Oracle
    2. Microsoft and 3Com Corporation
    3. Apple and Microsoft
    4. Novell and Microsoft
    5. Apple and 3Com Corporation
    Answer: B
19. What is the full form of PIC?
    1. Process interrupt Control
    2. Programmable interrupt controller
    3. Programmable internet control
    4. Programmed interrupt controller
    5. Process interrupt controller
    Answer: B
20. Booting is a defined as -------------
    1. Loading and initialization of operating system
    2. Loading and finding of operating system
    3. Finding and initialization of operating system
    4. Loading, finding and initialization of operating system
    5. None of these
    Answer: D

General MCSE Sample Questions part-1

Microsoft Certified Systems Engineer (MCSE) is a Microsoft exam that focuses on program trainee jobs. The major topics included in MCSE are Booting, Troubleshooting, Internetworking with remote access service NetWare connectivity, TCP/IP and Network Environment. This section belongs to a set of general question of MCSE that includes cabling, OSI models, RAID, and LPT. Let us have a look on some of these questions along with the correct answers provided after the end of each question.

Following are some of the general questions that will help you give your MCSE exam:

1. What is the outside diameter of RG-58 cable?
   1. 0.2
   2. 0.4
   3. 0.6
   4. 0.8
   5. 1.0
   Answer: A
2. What is the fault tolerance of RAID 1?
   1. n drive
   2. n-1 drives
   3. n-2 drives
   4. n-3 drives
   5. n-4 drives
   Answer: B
3. Network Driver Interface Specification (NDIS) acts as an interface between which two layers of OSI (Open Systems Interconnection) Model?
   1. Physical Layer and Data Link Layer
   2. Data link Layer and Network Layer
   3. Network Layer and Transport Layer
   4. Transport Layer and Session Layer
   5. Session Layer and Presentation Layer
   Answer: B
   
4. What is the impedance on RG-58 cable?
   1. 30
   2. 45
   3. 50
   4. 65
   5. 70
   Answer: C
5. What is another name for 10BASE2 coax cables?
   1. Baseband
   2. Broadband
   3. Thin Ethernet
   4. Twisted Pair
   5. Thicknet
   Answer: C
6. Which of the following IRQs are used for LPT1 and LPT2 respectively?
   1. IRQ 2 and IRQ 3
   2. IRQ 3 and IRQ 4
   3. IRQ 5 and IRQ 6
   4. IRQ 7 and IRQ 5
   5. IRQ 5 and IRQ 7
   Answer: D
7. What is the maximum length of 10BASE2 coax cables?
   1. 150
   2. 160
   3. 180
   4. 185
   5. 190
   Answer: D
8. What is LPT abbreviated as ___________?
   1. Line processing terminal
   2. Line programming terminal
   3. Line printing terminal
   4. Line print terminal
   5. Local print terminal
   Answer: D and E
9. Whish two companies developed Open Data-Link Interface (ODI)?
   1. Apple
   2. Oracle
   3. Microsoft
   4. Intel
   5. Novell
   Answer: A and E
10. What is the space efficiency of RAID 3?
    1. 1-1/n
    2. 1
    3. 1/n
    4. 1+1/n
    5. n

CCNA Sample Questions 640-801

CCNA (Cisco Certified Network Associate) is a secondary level of CISCO certification that validates your ability to implement and verify the network connections to remote sites on a WAN. The syllabus includes the use of routing protocols like Frame Relay, EIGRP, IP as well as VLANs, access control lists and Ethernet. To achieve this certification you need to pass CCNA exam #640-802. Here are some sample questions to help you prepare for the exam.

1. How do you display information about IPX routing update packets, if you can use "debug IP igrp transaction" or "debug IP igrp events" to monitor IP igrp traffic?
   1. debug ipx routing activity
   2. debug ipx transaction
   3. debug routing
   4. debug ipx events
   Answer :A
2. What command would you use to monitor ipx traffic on a network?
   1. debug ipx transaction
   2. display ipx traffic
   3. show ipx events
   4. show ipx traffic
   Answer :D
3. What are the default settings if the "ipx delay number" command allows an administrator to change the default settings?
   1. For LAN interfaces, six ticks; for WAN interfaces, one tick
   2. For LAN interfaces, one tick; for WAN interfaces, six ticks
   3. For LAN interfaces, zero ticks; for WAN interfaces, five ticks
   4. For LAN interfaces, five ticks; for WAN interfaces, zero Ticks
   Answer :B
4. The commands interface Ethernet 0.1 ipx encapsulation and interface Ethernet 0.2 ipx encapsulation, setup the sub-interfaces to allow for two types of encapsulation: Novell-ether ipx network 9e and sap ipx network 6c. What does the "IPX maximum-paths 2″ commands accomplish?
   1. It sets up routing to go to network 2
   2. It is the default for Cisco IPX load sharing
   3. It enables load sharing on 2 paths if the paths are unequal metric paths
   4. It enables load sharing on 2 paths if the paths are equal metric paths
   Answer :D
5. To find out the names of Novell servers on a network, what command would you use?
   1. show ipx hosts
   2. show ipx servers
   3. show ipx nodes
   4. show ipx sap
   Answer :B
6. A sample configuration follows: ipx Ethernet 0.1 ipx encapsulation Novell-ether ipx network 9e interface and Ethernet 0.2 ipx encapsulation sap ipx network 6c to assign multiple network numbers. By default, Cisco routers forward GNS SAPs to remote networks.
   1. True
   2. False
   3. None of them
   4. Both of them
   Answer :B
7. NLSP (NetWare Link Services Protocol) provides link-state routing; SAP (Service Advertisement Protocol) gives information about network services and NCP i.e. NetWare Core Protocol gives client-to-server connections and applications. RIP is a distance vector routing protocol. What command should you use instead of "debug IP igrp transaction" as a system administrator in order to debug igrp?
   1. debug IP iprg event
   2. debug IP igrp events
   3. debug IP irpg events
   4. debug IP igrp summary
   Answer :B
8. All SAPs can't be filtered even with 4.x since NDS and time synchronization uses SAPs. Cisco routers build SAP tables and forward the table every 60 seconds. The Novell's implementation of RIP updates routing tables every ____ seconds.
   1. 90
   2. 10
   3. 60
   4. 30
   Answer :C
9. Novell's GNS protocol is used to Get Nearest Server. The respective server then responds if there is a server on the local network. Otherwise, the Cisco router has to be configured to forward the GNS SAP. But, Cisco routers do not forward the SAPs so as to prevent the network from being flooded. How can you service the advertisements to other networks?
   1. By broadcasting the service number assigned by the router.
   2. By having a SAP table built by every router that is forwarded every 60 seconds.
   3. Cisco routers filter out all SAPs.
   4. SAPs aren't necessary with Cisco routers.
   Answer :B
10. As a system administrator, you need to set up one Ethernet interface on the Cisco router to allow for both sap and Novell-ether encapsulations. The default setting is-for LAN interfaces, one tick; for WAN interfaces, six ticks. Which set of commands will accomplish this?
    1. interface Ethernet 0 ipx encapsulation Novell-ether ipx network 9e interface Ethernet 0 ipx encapsulation sap ipx network 6c
    2. interface Ethernet 0.1 ipx encapsulation Novell-ether ipx network 9e interface Ethernet 0.2 ipx network 6c
    3. interface Ethernet 0.1ipx encapsulation Novell-ether ipx network 9e interface Ethernet 0.2 ipx encapsulation sap ipx network 6c
    4. interface Ethernet 0.1 ipx encapsulation Novell-ether interface Ethernet 0.2 ipx encapsulation sap
    Answer :C