Server 2003 MCSE Questions part-5

Microsoft Certified Systems Engineer is one of the best certification launched by Microsoft in order to validate a network associates abilities. This section of question and answer deals with RAID, operating system, troubleshooting, protocol, TCP/IP, OSI model, and a) Organizationally Unique Identifier (OUI). Let us have a look on these questions one by one.

41. What is the fault tolerance of RAID 6?
    1. 0 drive
    2. 1 drive
    3. 2 drives
    4. 3 drives
    5. 4 drives
    Answer: C
42. ____________ is a process of initializing, loading and finding the operating system?
    1. Booting
    2. Troubleshooting
    3. Internetworking
    4. Network Browsing
    5. None of these
    Answer: A
43. Name the widely known protocol that is used for interconnecting computers?
    1. User Datagram Protocol
    2. File Transfer Protocol
    3. Hyper-Text Transfer Protocol
    4. Transmission Control Protocol/Internet Protocol (TCP/IP)
    5. Interior Gateway Routing Protocol
    Answer: D
44. Which is the layer of OSI model that is responsible for breaking down the large messages into small packets and later on reassembling them together and sending them to their destination?
    1. Physical layer
    2. Data link layer
    3. Transport layer
    4. Application layer
    5. Network layer
    Answer: C
45. Name the non-volatile storage in the computer system?
    1. Files
    2. Floppy disk
    3. Hard disk
    4. RAM
    5. Folder
    Answer: B and C
46. What is the minimum number of drives in RAID 6?
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Answer: D
47. What is the space complexity of RAID 6?
    1. 1
    2. 1 - 1/n
    3. 1 - 2/n
    4. 1 - 3/n
    5. None of these
    Answer: C
48. What is the full form of OUI?
    1. Organizationally Unique Identifier
    2. Orthogonal Unique Identifier
    3. Organizationally Unique Identification
    4. Orthogonal Unique Identification
    5. None of these
    Answer: A
49. Let us assume that there is a server that contains 3 MAC addresses, then how many network cards does it require?
    1. 2
    2. 3
    3. 4
    4. 6
    5. 10
    Answer: B
50. Which command is used to view the IP Configuration of a network on a server?
    1. Ping
    2. Ipconfig
    3. Ipconfig /all
    4. Ping -all
    5. None of these
    Answer: C